i just put mine togethter a few minutes ago, i used a wheel from an old 24 incher(i am pretty tall(about 5’10"), so you might want something else) in the backyard. i used super crappy plates that i made in metals, that i had to redrill cuz they hung way too low(about 5" drilled to about 3")
evan i asked you a few months ago and you said 26s are too high 20s are too dodgy and 24s are juuuust right.
A 26" with 1.75 tire is about the same as a 24" with 3.0 tire
is that what you had?(24x3)
cuz wasnt your halo rim and a hookworm 24"s? or have you gotten a new one?
I use different tires for what ever mood im in.
well i’ve just found i’ve got a nice chrome 24" rim in the shed with spokes and a rear hub. I’d probably have to take the rear hub off and replace it with another one i’ve got down there to a front hub. it’s got a fairly slick tyre on it which is good. How would i go about making the plates? just got some 3" angle iron and drill a hole in one side?? what should the distance be between the hole and the part where i put my feet? Thanks guys
ok so youve got more than one white one?
Yeah?
man this sucks, i just had a nice old upd on the bc. i was just getting about 10-15 feet consistantly, then took a water break then was tired but figured id try once more, i jumped on , went about 5 feet, stopped suddenely, slid across my drive way about 3 feet on my habds and hip.and the feeling is just now coming back to those places and it fricken hurts!
get a fireball tire on that would be sweet
It eats your leg to hell, even with ace wraps.
Spencer will agree with me.
I agree.
Ok i think we’re all up to speed with what Evan has got on his BC wheel now and why. Thanks for the help so far guys, what’s the best way to learn how to BC? grab a pair of ski poles and go around with them or down a hill or what? Cheers
find a slight downhill and grab a pole, put both ur feeton the footplates and just roll, if u need give urself a push to get a bit of momentum up, dont be scared, just do it.
im thinking of building a BC wheel as well, ive got a nice 24 inch wheel im gonna use with a suitable hub to use. ive got a 24" x 2.5 hookworm tire but i rekon i should get a thinner tire. i rekon for building the plates you should get some fairly thick metal like 5mm or something and drill holes in it to go on the hub and then use a magnebend to bent it to 90 degrees. that should be good for it.
cheers, keep it wheel.
Tom you can’t ride a BC wheel, you’ve never tried…
did i say i could ride one, it doesnt mean i dont know how to ride one.
Hello Everyone,
I think i’m going to buy a Bedford 20’’ BC Wheel with pro platforms.
But does the Bedford 20’’ BC Wheel have a lot of grip so i can use it in a skatepark and other traillines?
Or should i buy the Bedford trails with pro platforms?
Thankx
Job
You know if you want a decently strong wheel you know you can’t use the old spokes right?
If it for a rear the wheel has a dish in it, then when you put in the the front hub it will be all wierd
cough or you could get this one (better and cheeper)