Schlumpf 2022 Build Questions

[mindbalance]

@r4nd1nt

[Wiki] Schlumpf 2022 Hubs - Frame Compatibility

I somehow have a feeling that this question has been asked before but I’m unable to locate the post. So, I bought a Mad4One frame for my Schlumpf wheel, however either my spokes are too thick or the frame is to narrow: [IMG_20230719_200120] [IMG_20230719_200213] What are my options? I don’t want to order every possible frame only to notice that I run into the same problem with every frame. Could someone point me to the place where this has been discussed before (if it has…) Thanks …

Pulling you over into this thread to discuss your issue.

This previous post may help you:

Schlumpf 2022 Build Questions

I’ll share a few pictures / notes from my build as it may be of help for others. Hub is 100mm 36h Frame is a M4O size M. EN933 light bicycle rim (29", 3mm offset) I’m using Sapim Race (2.0-1.8-2.0) spokes on the disc side. Disc is 180mm with 2x1mm M4 spacer between disc and hub (my caliper measured them at 0,8mm each so it’s probably closer to 1,5mm than 2mm spacers) Caliper is a Shimano BR-MT420 (with the corner filed off for a bit more clearance). Picture shows the very tight clearance …