Repairing a pedal ?

>Paul wrote; >…I have stripped the thread of one of the pedals …

You have a few options, with varying difficulty and cost;

  1. If just the thread on the pedal spindle is stripped, buy a new spindle and
    rebuild the pedal.

  2. If the thread in the crank is stripped, which is more likely - either buy a
    new crank, or take the crank to a good bike shop. They can drill it out
    oversize, ream it and re-tap it to take a threaded insert which fits the
    original pedal threads. This can get expensive, and you may find it cheaper
    to buy a new crank.

---- Chris

                                                                        • Chris C.
                                                                          Broome ARCO Products Company pwtccb@is.arco.com 1055 West 7th St Tel:
                                                                          213-486-0453 Fax: 213-486-8301 Los Angeles, California 90017