# Post Your 36er Here

**URL:** <https://unicyclist.com/t/post-your-36er-here/109921>\
**Category:** Unicycles and Equipment\
**Created:** [February 24, 2010, 1:16pm UTC](https://unicyclist.com/t/post-your-36er-here/109921 "2010-02-24T13:16:32Z")\
**Posts on this page:** 1\
**Showing post:** 295

<div class="post-metadata">

**Author:** ![naturequack](https://unicyclist.com/user_avatar/unicyclist.com/naturequack/32/1950_2.png) [@naturequack](https://unicyclist.com/u/naturequack)\
**Post date:** [April 8, 2011, 1:30pm UTC](https://unicyclist.com/t/post-your-36er-here/109921/295 "2011-04-08T13:30:26Z")

</div>

Here’s the Purple Phaze thread.

> [@Geared 36](https://unicyclist.com//t/geared-36/67232/1):
>
> For the past 8 months one of my fabrication projects has been a geared 36". Today I finally completed the first version and took it for a short spin. The 150 cranks seem fine with the 1:1.5 ratio. I used a double 22/18 cog reduction, with a std. 3/32" chain. The hub is a PW track hub & cog. The jackshaft is a couple of track hubs cut & just the cog portions welded together. Adjustment via dropouts & std. chain tensioners. The basic frame was brazed up by Rick Hunter per my “V” design, and…

---

_[View the full topic](https://unicyclist.com/t/post-your-36er-here/109921)._