# Pedal Thread

**URL:** <https://unicyclist.com/t/pedal-thread/103366>\
**Category:** Unicycles and Equipment\
**Created:** [December 12, 2008, 1:39pm UTC](https://unicyclist.com/t/pedal-thread/103366 "2008-12-12T13:39:02Z")\
**Posts on this page:** 1\
**Showing post:** 502

<div class="post-metadata">

**Author:** ![DrD](https://unicyclist.com/user_avatar/unicyclist.com/drd/32/3962_2.png) [@DrD](https://unicyclist.com/u/DrD)\
**Post date:** [May 30, 2021, 9:23pm UTC](https://unicyclist.com/t/pedal-thread/103366/502 "2021-05-30T21:23:56Z")

</div>

Hope F20 – I have several pairs of these on both unicycles and bikes. These are my latest acquisition – the blue goes nicely with the KH blue and the blue Hope brake rotor. These have pretty aggressive pins and hold your feet very firmly, a downside is that they can also mess up the back of your leg pretty badly ☹

Pros:

- Machined from solid aluminium and should be pretty unbreakable. I have ones which have taken a fair beating.
- The end of the axle is protected inside the pedal body so strikes on the side shouldn’t affect the bearings or spindle.
- Pins hold your feet pretty firmly in place especially with 5-10s.
- Fully serviceable and service kits readily available.
- Look pretty nice in my opinion
- Available in six colours (anodised), the blue seems to match KH blue pretty well.
- They’re Hope 🙂

Cons:

- Expensive
- The pins can cut you up…
- Need special socket for getting in to the Nyloc nut on the spindle end.

 ![Hope_F20_blue](https://unicyclist.com/uploads/default/original/3X/d/4/d4b6a1303735ace5a4742bea58b0bbbb4a847840.jpeg)

---

_[View the full topic](https://unicyclist.com/t/pedal-thread/103366)._