Pashley 26-inch Power MUni Wheelset Ugrade

Which is the distance between the bearings on this wheel ?

Re: Pashley 26-inch Power MUni Wheelset Ugrade

Cedric,

From experience these bearing last and last! I have only ever replaced 2
pairs and they were over 15 years old! The reason it that they are held so
well within the bearing holders giving no pressure points.

Roger


The UK’s Unicycle Source


----- Original Message -----
From: “Cédric Monneron” <cedric.monneron@xemics.com>
Newsgroups: rec.sport.unicycling
To: <rsu@unicycling.org>
Sent: Monday, December 02, 2002 8:00 AM
Subject: Pashley 26-inch Power MUni Wheelset Ugrade

> Which is the distance between the bearings on this wheel ?
>


> rec.sport.unicycling mailing list -
www.unicycling.org/mailman/listinfo/rsu
>
>

Re: Pashley 26-inch Power MUni Wheelset Ugrade

Sorry but …i have some problem with my english !

I don’t want to know the age of the bearings but the length between
the bearing of left and that of right-hand side !

Roger Davies wrote:
>
> Cedric,
>
> From experience these bearing last and last! I have only ever replaced 2
> pairs and they were over 15 years old! The reason it that they are held so
> well within the bearing holders giving no pressure points.
>
> Roger
> __________________________
>
> The UK’s Unicycle Source
> http://www.unicycle.uk.com
> __________________________
> ----- Original Message -----
> From: “Cédric Monneron” <cedric.monneron@xemics.com>
> Newsgroups: rec.sport.unicycling
> To: <rsu@unicycling.org>
> Sent: Monday, December 02, 2002 8:00 AM
> Subject: Pashley 26-inch Power MUni Wheelset Ugrade
>
> > Which is the distance between the bearings on this wheel ?
> >
> ___________________________________________________________________________
> > rec.sport.unicycling mailing list -
> www.unicycling.org/mailman/listinfo/rsu
> >
> >

Re: Pashley 26-inch Power MUni Wheelset Ugrade

Sorry, your English was ok, it was my reading that was bad.

It is a standard Susue hub so should be 76mm between the inside of the
bearings I believe.

Roger


The UK’s Unicycle Source


----- Original Message -----
From: “Cédric Monneron” <cedric.monneron@xemics.com>
Newsgroups: rec.sport.unicycling
To: <rsu@unicycling.org>
Sent: Monday, December 02, 2002 11:13 AM
Subject: Re: Pashley 26-inch Power MUni Wheelset Ugrade

> Sorry but …i have some problem with my english !
>
> I don’t want to know the age of the bearings but the length between
> the bearing of left and that of right-hand side !
>
> Roger Davies wrote:
> >
> > Cedric,
> >
> > From experience these bearing last and last! I have only ever replaced
2
> > pairs and they were over 15 years old! The reason it that they are held
so
> > well within the bearing holders giving no pressure points.
> >
> > Roger
> > __________________________
> >
> > The UK’s Unicycle Source
> > http://www.unicycle.uk.com
> > __________________________
> > ----- Original Message -----
> > From: “Cédric Monneron” <cedric.monneron@xemics.com>
> > Newsgroups: rec.sport.unicycling
> > To: <rsu@unicycling.org>
> > Sent: Monday, December 02, 2002 8:00 AM
> > Subject: Pashley 26-inch Power MUni Wheelset Ugrade
> >[color=darkred]
> > > Which is the distance between the bearings on this wheel ?
> > >
> >[/color]
___________________________________________________________________________[color=darkred]
> > > rec.sport.unicycling mailing list -
> > www.unicycling.org/mailman/listinfo/rsu
> > >
> > >
>[/color]


> rec.sport.unicycling mailing list -
www.unicycling.org/mailman/listinfo/rsu
>
>

Re: Pashley 26-inch Power MUni Wheelset Ugrade

I want to find a wheel with 86mm between the inside of the
bearings. The bearings width is 12mm.
I don’t know the type of my MUNI…
If you can help me …

Roger Davies wrote:
>
> Sorry, your English was ok, it was my reading that was bad.
>
> It is a standard Susue hub so should be 76mm between the inside of the
> bearings I believe.
>
> Roger
> __________________________
>
> The UK’s Unicycle Source
> http://www.unicycle.uk.com
> __________________________
> ----- Original Message -----
> From: “Cédric Monneron” <cedric.monneron@xemics.com>
> Newsgroups: rec.sport.unicycling
> To: <rsu@unicycling.org>
> Sent: Monday, December 02, 2002 11:13 AM
> Subject: Re: Pashley 26-inch Power MUni Wheelset Ugrade
>
> > Sorry but …i have some problem with my english !
> >
> > I don’t want to know the age of the bearings but the length between
> > the bearing of left and that of right-hand side !
> >
> > Roger Davies wrote:[color=darkred]
> > >
> > > Cedric,
> > >
> > > From experience these bearing last and last! I have only ever replaced
> 2
> > > pairs and they were over 15 years old! The reason it that they are held
> so
> > > well within the bearing holders giving no pressure points.
> > >
> > > Roger
> > > __________________________
> > >
> > > The UK’s Unicycle Source
> > > http://www.unicycle.uk.com
> > > __________________________
> > > ----- Original Message -----
> > > From: “Cédric Monneron” <cedric.monneron@xemics.com>
> > > Newsgroups: rec.sport.unicycling
> > > To: <rsu@unicycling.org>
> > > Sent: Monday, December 02, 2002 8:00 AM
> > > Subject: Pashley 26-inch Power MUni Wheelset Ugrade
> > >
> > > > Which is the distance between the bearings on this wheel ?
> > > >
> > >
> ___________________________________________________________________________
> > > > rec.sport.unicycling mailing list -
> > > www.unicycling.org/mailman/listinfo/rsu
> > > >
> > > >
> >
> ___________________________________________________________________________
> > rec.sport.unicycling mailing list -
> www.unicycling.org/mailman/listinfo/rsu
> >
> >[/color]