Custom Kris Holm Unicycles

[The UniSLAB]

Yeah I'm not gonna lie, thats a pretty cool uni. I never liked the stripped/raw finish uni's either but it looks like you did a good job. Like to see what it looks like when your done.

Originally Posted by bungalistic

Here's mine, wheel is borrowed from a mate as my new wheel is being built at this current time.

[bailingmarne]

My custom KH looks like this:





Parts:
-KH fusion seat
-KH Moment Hub & Cranks
-KH 2007 frame (spraypainted Glossy White)
-KH 2007 Rim (sanded sidewalls)
-Specialized Al pedals
-Maxxis CC
-CrMo seatpost
-24 Cockring 2-bolt seatclamp

[sp4rky-m4rky]

After seeing those last two unis I think I am sold on sanding down the sidewalls of my rim and I think I shall strip the frame as well.

Originally Posted by bungalistic

The frame was simply stripped using wire wool and nitromors automotive paint remover, once fairly clean of most of the blue it was rubbed down eveywhere with fine wire wool, dusted/polished off then clear spray laquered

Just curious, what was the reason you decided to spray it with a clear laquer? Did you do it yourself? were can you get it from and how much does it cost?

[Probailer2]

Originally Posted by bailingmarne

My custom KH looks like this:

Parts:
-KH fusion seat
-KH Moment Hub & Cranks
-KH 2007 frame (spraypainted Glossy White)
-KH 2007 Rim (sanded sidewalls)
-Specialized Al pedals
-Maxxis CC
-CrMo seatpost
-24 Cockring 2-bolt seatclamp

Nice paintjob.
Maybe needs a white camoflage sadle or something like that.
Oh, and it's not a 24 cockring, its a Brave clamp

Peter M

[bailingmarne]

Originally Posted by Probailer2

Nice paintjob.
Maybe needs a white camoflage sadle or something like that.
Oh, and it's not a 24 cockring, its a Brave clamp

Peter M

Tnx, but my seatclamp is a 24, bought it on FLUCK, not the same as your 1-bolted braveheart

Need to go & ride with you again sometimes

[bungalistic]

Originally Posted by sp4rky-m4rky

After seeing those last two unis I think I am sold on sanding down the sidewalls of my rim and I think I shall strip the frame as well.

Just curious, what was the reason you decided to spray it with a clear laquer? Did you do it yourself? were can you get it from and how much does it cost?

Just used the laquer as I figured it would protect it a bit more its not too expensive cost me about £5 from B&Q I only used a few coats so there's plenty left in it too for future use/projects.

[Municycler]

bailingmarne you have some equisite grass right there. I like it.

Oh... and your uni is really nice aswell

[Probailer2]

Originally Posted by bailingmarne

Tnx, but my seatclamp is a 24, bought it on FLUCK, not the same as your 1-bolted braveheart

Need to go & ride with you again sometimes

You bought it AT FLUCK

Peter M

[isaac steiner]

Originally Posted by bailingmarne

My custom KH looks like this:





Parts:
-KH fusion seat
-KH Moment Hub & Cranks
-KH 2007 frame (spraypainted Glossy White)
-KH 2007 Rim (sanded sidewalls)
-Specialized Al pedals
-Maxxis CC
-CrMo seatpost
-24 Cockring 2-bolt seatclamp

Thats awesome! I love the white!

[bailingmarne]

Originally Posted by Municycler

bailingmarne you have some equisite grass right there. I like it.

Oh... and your uni is really nice aswell

Ghaha, goodone.
_ _ _ _ _ _ _ _ _

And thanks Isaac. glad you like the colour




.

[Probailer2]

Originally Posted by isaac steiner

Thats awesome! I love the white!

Yeah, the green of the grass is nothing against it
But the frame looks beter in real live.

Peter M

[isaac steiner]

Cool...

[uni_mattster]

Originally Posted by isaac steiner

heres one more

Is that the street standard fusion saddle? It looks much thicker than usual

[surfer1024]

It looks like a fusion freeride. It's a lot thicker than my kh fusion street which is sitting by me now

[bungalistic]

Finally got my new wheel built and put on the frame she now looks like this: