Unicyclist Community

Go Back   Unicyclist Community > Unicycling Discussion > Unicycle Product Reviews

 
 
Thread Tools Search this Thread Rate Thread Display Modes
Prev Previous Post   Next Post Next
Old 2011-12-06, 11:04 PM   #1
saskatchewanian
ERIC P
 
saskatchewanian's Avatar
 
Join Date: Jan 2007
Location: La Ronge, Saskatchewan, Canada
Age: 34
Posts: 6,462
Nimbus D-brake -vs- Mountain Uni UCM brake mounts

I recently purchased a Nimbus D'brake brake mount to use on my KH36 with existing MU disk brake system. UDC/Nimbus have never stated that the brake mount would work for an outboard disk, and when asked they seem to dodge the question by stating that they were designed to be used in conjunction with their disk hubs.

The reason I wanted to try the D'brake is: I have to take the calliper off the mount every time I remove the wheel with the UCM. Not a major problem but annoying for someone who changes tires/wheels a lot.


Here is the differences I found between the UCM and D'brake mount

Mountain Uni UCM
slightly thinner, no clearance problems, mine would just barely work with a schlumpf.
Tighter fit on bearing, less chance of movement
taller brake mount arm,
- places calliper closer to the frame and makes the brake line go strait up.
- caliper needs to be removed when removing wheel

Nimbus D'brake mount
wider, would not work with a schlumpf without additional grinding/machining. less than 1mm clearance to spokes (nimbus hub, standard spacers)
looser fit on bearing, easier to remove
shorter brake arm.
- caliper is further from frame and hydro line angles out, could get snagged.
- caliper does not need to be removed when removing the wheel.

I am actually not sure which one I will end up leaving on the unicycle. I can't feel any difference braking and they both seem to have about the same amount of flex. Basically the UCM tucks things away a bit nicer but adds a step in removing a wheel.





oh and the bolt holes are about 2mm deeper on the D'brake meaning you need slightly shorter bolts. The 18mm(?) bots that come with it are a bit too long. I replaced them with some 16mm socket head bolts.
__________________
My friends, love is better than anger. Hope is better than fear. Optimism is better than despair. So let us be loving, hopeful and optimistic. And we’ll change the world. - Jack Layton
saskatchewanian is offline   Reply With Quote
 

Tags
brake, dbrake, mountain, mounts, nimbus, ucm, uni


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Mountain Uni Disk Brake System saskatchewanian Unicycle Product Reviews 8 2012-06-25 10:35 PM
2009 Nimbus 26" Muni Frame with Factory Brake Mounts! Nurse Ben Unicycle Product Reviews 24 2009-07-20 10:35 PM
Custom 2008 Nimbus 26" Muni with Magura Brake Mounts Nurse Ben Trading Post 3 2008-10-17 05:43 PM
Nimbus 36 brake mounts misplaced goldenchicken III General Unicycling Discussions 14 2007-10-20 08:09 AM
Onza brake mounts kington99 General Unicycling Discussions 10 2005-10-27 10:56 AM


All times are GMT. The time now is 01:33 AM.


Powered by vBulletin®
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Copyright © 2001-2019 Gilby
You Rated this Thread:
Page generated in 0.10173 seconds with 13 queries