Unicyclist Community

Go Back   Unicyclist Community > Unicycling Discussion > General Unicycling Discussions

Thread Tools Search this Thread Rating: Thread Rating: 3 votes, 5.00 average. Display Modes
Old 2004-12-14, 11:56 AM   #16
Back into muni!
andrew_carter's Avatar
Join Date: Jun 2002
Location: Brisbane, Australia
Age: 33
Posts: 5,242
Re: Re: Re: Re: Re: Cost of Schlumpf Geared Unicycle.

Originally posted by Klaas Bil
That's what I was thinking too. On second thought though, that little button may not interfere with the crank at all. It may just move in the space 'above' the crank nut (the space that is usually covered by a dust cap if it hasn't fallen off) and only be attached to the shifting mechanism that runs from left to right all the way through.
Hmmm, quite possibly...hopefully.
Originally posted by Klaas Bil
I think you only read someone wishing that that be implemented. I read that somewhere too.
I thought I might have heard it from a friend of mine who has been in contact with Schlumf and actually came up with this whole idea of adapting one of their hubs. The memory is vague though.

andrew_carter is offline   Reply With Quote
Old 2004-12-14, 02:42 PM   #17
I always wear my helmet.
willfcc's Avatar
Join Date: Feb 2002
Location: Gresham, Oregon, USA
Posts: 147

Any square taper crank should work. The shift buttons screw onto a narrow shaft, and are locked in place with a set screw. The crank nuts have a hole in the center for the shaft to pass through. As Klaas thought, the shift button "floats" in the area normally occupied by the dust cap.
When you purchase Schlumpf's tool kit, you get a metal tube that fits over the shaft to allow removal of the crank using a standard crank puller.

I'm not suprised at the $1300 price tag. Sure, initial run is a complete uni with aluminum frame, but most of us want to update seats/frames/cranks, etc. When you eliminate everything else from the cost, you'd still end up at almost $1000 just for the hub. And don't forget the customs duty if imported into the US. That will be close to another $100.
willfcc is offline   Reply With Quote
Old 2004-12-14, 08:14 PM   #18
Adventure Unicyclist
GizmoDuck's Avatar
Join Date: Apr 2002
Location: Wellington, NZ
Age: 41
Posts: 3,676
Now that makes sense

I wonder what the likelihood of an accidental shift would be when pedalling at high speed?

$1300 US isn't too bad- most high end MUNis are around about that. And a Airfoil Coker would be pretty much close to that price in NZ. It might get quite expensive when you start rebuilding it onto a Coker though

GizmoDuck is offline   Reply With Quote

cost, geared, schlumpf, unicycle

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT. The time now is 07:19 PM.

Powered by vBulletin®
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Copyright © 2001-2019 Gilby
You Rated this Thread:
Page generated in 0.05171 seconds with 13 queries