Unicyclist Community Helium in a foss tube will leak?
 Register FAQ Members List Social Groups Calendar Search Today's Posts Mark Forums Read

 2019-05-24, 06:25 AM #1 Vogelfrei80 Beginner   Join Date: May 2017 Location: Italy Posts: 226 Helium in a foss tube will leak? Dumb question?
 2019-05-24, 06:56 AM #2 finnspin one wheeled cycling     Join Date: Nov 2008 Location: Lüneburg,Germany Posts: 748 Probably. Also yes, since it will provide very small weight savings for the price and effort. You can either do the math yourself or google it to find someone that has done it already. Bottom line is, you probably wouldn't be able to measure the weight difference if you put the unicycle on a scale afterwards. __________________ In the beginning the Universe was created. This has made a lot of people very angry and been widely regarded as a bad move. -Douglas Adams.
 2019-05-24, 07:26 AM #3 OneTrackMind Unicyclist   Join Date: Jun 2014 Location: Murwillumbah, NSW, Australia Age: 59 Posts: 1,018 Helium leaks very easily. I doubt it would stay inflated for long. I assume you are thinking of saving weight by using Helium in the tube. Air has a standard density of about 1.2 kg per cubic metre while Helium is about 90 grams. Raised to four atmospheres (60 psi) gauge, amounts to a difference of about 5.5 grams per litre. (Assuming all the air was removed, we multiply by five rather than four since the first atmosphere in the tube doesn't register on the pressure gauge.) A big 36 inch tyre with say a 7.5 cm (3 inch) wide circular cross-section would have a volume of about twelve litres so you would be saving about 65 grams of mass by using Helium instead of air. Someone might want to check my logic and maths. __________________ Triton 36" + 29" | KH 29" | KH 26" | Nimbus eSport Race 24" | Torker LX 24" | Qu-Ax Luxus 20" | Qu-Ax Profi 20" | KH Onza 19"
2019-05-24, 07:46 AM   #4
finnspin
one wheeled cycling

Join Date: Nov 2008
Location: Lüneburg,Germany
Posts: 748
Quote:
 Originally Posted by OneTrackMind Someone might want to check my logic and maths.
I was bored too and did the math with very similar numbers, and got 68 grams of weight savings. More than I expected, if you have a pretty accurate scale you might actually be able to measure that. (most home scales are accurate to 0.1 kg).
__________________
In the beginning the Universe was created. This has made a lot of people very angry and been widely regarded as a bad move. -Douglas Adams.

 2019-05-24, 08:43 AM #5 DrD Unicyclist   Join Date: Aug 2017 Location: Scotland Posts: 43 Thermoplastic inner tubes (which I think FOSS tubes are) should, I think, stay inflated with helium longer than butyl tubes. One of their advantages is that they keep air pressure better so presumably this makes them less permeable to helium as well. Quite how they would compare to the mylar foil used for helium balloons I have no idea. Some info on thermoplastic tubes: http://www.polyurethanes.basf.de/pu/...h_applications Quite whether it is a good idea or not, looking at more aspects than just weight saving, is explored (somewhat tongue-in-cheek) here: https://www.cyclist.co.uk/in-depth/7...es-with-helium
 2019-05-24, 11:01 AM #6 Vogelfrei80 Beginner   Join Date: May 2017 Location: Italy Posts: 226 I was just wondering about the rotational weight saving for a light road 3.8 fat tire with a fat foss tube. Not meant to improve overall weight, intersted only in the rotational mass. Not interested in butyl tubes, nor in tubeless setup, nor in heavy spokes or rim... Why not a fat termoplastic tube filled with helium?
2019-05-24, 11:12 AM   #7
Vogelfrei80
Beginner

Join Date: May 2017
Location: Italy
Posts: 226
Quote:
 Originally Posted by DrD Thermoplastic inner tubes (which I think FOSS tubes are) should, I think, stay inflated with helium longer than butyl tubes. One of their advantages is that they keep air pressure better so presumably this makes them less permeable to helium as well. Quite how they would compare to the mylar foil used for helium balloons I have no idea. Some info on thermoplastic tubes: http://www.polyurethanes.basf.de/pu/...h_applications Quite whether it is a good idea or not, looking at more aspects than just weight saving, is explored (somewhat tongue-in-cheek) here: https://www.cyclist.co.uk/in-depth/7...es-with-helium
The last link seems to tell me: helium is not so important... but if you use a big air tire... made to be ride not at low psi... not in a butyl tube... you could save the weight in the most important part a uni...

Can you help me with the math for a 3.8" inflated at 40PSI?

2019-05-24, 01:19 PM   #8
OneTrackMind
Unicyclist

Join Date: Jun 2014
Location: Murwillumbah, NSW, Australia
Age: 59
Posts: 1,018
Quote:
 Originally Posted by Vogelfrei80 Can you help me with the math for a 3.8" inflated at 40PSI?
The volume of the tube is its cross sectional area times the average distance around the tyre measured in centimetres to give a result in cubic centimetres which is the equivalent of a millilitre. Air weighs about 1.2 grams per cubic centimetre. Multiply this by the number of atmospheres pressure plus one.

The cross-sectional area depends on the rim as well as the tyre and there are irregularities but it approximates a circle with a diameter equal to the maximum width of the mounted tyre.

The area is pi times half the width of the tyre squared.

The length is the pi times slightly less than the nominal wheel diameter. This is best measured in the individual case as we know that tyre sizes are just numbers.
__________________
Triton 36" + 29" | KH 29" | KH 26" | Nimbus eSport Race 24" | Torker LX 24" | Qu-Ax Luxus 20" | Qu-Ax Profi 20" | KH Onza 19"

 2019-05-24, 01:35 PM #9 OneTrackMind Unicyclist   Join Date: Jun 2014 Location: Murwillumbah, NSW, Australia Age: 59 Posts: 1,018 A trails tyre might be lightened by around thirty grams by inflating with Helium. That is not an insignificant difference in a high jump that only requires the tyre to stay inflated for a short time. Should it be outlawed? Are people already doing it? What about inflating with Nitrogen? It is slightly lighter than air due to the twenty percent content of the fifteen percent heavier oxygen molecules in air. Nitrogen would reduce the weight of the air in the tyre by three percent. This is about a gram in a trials tyre. BTW Planes have their tyres inflated with nitrogen but it isn't about the weight. __________________ Triton 36" + 29" | KH 29" | KH 26" | Nimbus eSport Race 24" | Torker LX 24" | Qu-Ax Luxus 20" | Qu-Ax Profi 20" | KH Onza 19"
 2019-05-24, 02:08 PM #10 mrfixit Unicyclist   Join Date: Aug 2017 Location: NE PA Posts: 94 Isn't helium a smaller sized element that would leak out of anything much faster than air or nitrogen? Don't foss tubes already have a problem that air leaks out regularly, all the time??
2019-05-24, 04:01 PM   #11
finnspin
one wheeled cycling

Join Date: Nov 2008
Location: Lüneburg,Germany
Posts: 748
Quote:
 Originally Posted by OneTrackMind A trails tyre might be lightened by around thirty grams by inflating with Helium. That is not an insignificant difference in a high jump that only requires the tyre to stay inflated for a short time. Should it be outlawed? Are people already doing it?
It's not significant. I'm willing to bet you could give any competitor a unicycle that is 200 grams lighter than his current one, and competition results wouldn't change. We are doing a ridiculous niche sport, not formula one. The big difference is riders and their technique, not equipment.

Quote:
 The last link seems to tell me: helium is not so important... but if you use a big air tire... made to be ride not at low psi... not in a butyl tube... you could save the weight in the most important part a uni...
How much would it suck to not want to pump up your unicycle on the trail because you didn't bring your helium bottle. Spend the time riding and building muscle, that will do much more than any rotational mass saving.

Quote:
 Can you help me with the math for a 3.8" inflated at 40PSI?
~10 grams of weight saving. About as much as a pencil weighs. I guarantee you would not notice it.

Spend the time you would have spend getting helium with riding instead, and enjoy. Spend the money you would want to invest into parts in traveling to unicycle conventions, and become a much better rider. Equipment is the smallest limit we face.
__________________
In the beginning the Universe was created. This has made a lot of people very angry and been widely regarded as a bad move. -Douglas Adams.

 2019-05-24, 04:17 PM #12 DrD Unicyclist   Join Date: Aug 2017 Location: Scotland Posts: 43 I think Vogelfrei80 is interested in the effect the lighter gas will have on reducing the overall moment of inertia of the wheel. Reducing that means you can accelerate/decelerate the wheel with less torque, and hence force on the pedals. If you assume that the gas is a torus and you calculate the change in mass as in the post above, you can work out the change in moment-of-inertia using the lighter gas. Here is a handy calculator (it is amazing what folk put on the interweb ) : https://www.vcalc.com/wiki/EmilyB/Mo...8about+axis%29 So for a particular linear acceleration of the unicycle you can work out the corresponding angular acceleration of the wheel and hence the extra torque you need to accelerate that difference in moment of inertia. Once you know the torque you can get the force on the pedals for a particular crank length. This will only be the change in force due to the different gas in the tube, you'd have to judge if this is significant, or model yourself and the unicycle in more detail to figure out the absolute force and then determine if the change is significant. Or at least that is my current thoughts on how to work this out I think one of the main reasons they put nitrogen in tyres is that it keeps pressure better. As far as I know this is because the N2 molecule is very slightly larger than the O2 in the air it replaces. Putting helium in has the opposite effect, hence the question on using a FOSS tube instead of a rubber one since the polyurethane material is apparently less permeable.
2019-05-24, 09:46 PM   #13
JimT
Unicyclist

Join Date: Jul 2017
Location: Pacific Northwest, USA
Age: 70
Posts: 323
Quote:
 Originally Posted by DrD I think Vogelfrei80 is interested in the effect the lighter gas will have on reducing the overall moment of inertia of the wheel. Reducing that means you can accelerate/decelerate the wheel with less torque, and hence force on the pedals. If you assume that the gas is a torus and you calculate the change in mass as in the post above, you can work out the change in moment-of-inertia using the lighter gas. Here is a handy calculator (it is amazing what folk put on the interweb ) : I think one of the main reasons they put nitrogen in tyres is that it keeps pressure better. As far as I know this is because the N2 molecule is very slightly larger than the O2 in the air it replaces. Putting helium in has the opposite effect, hence the question on using a FOSS tube instead of a rubber one since the polyurethane material is apparently less permeable.
When considering the rotational inertia or moment of inertia I don't think it is as simple as figuring the change in weight because the air or whatever gas is free to "flow" inside the tire. If the gas was not free to move inside the tire it would be pretty straight forward.

It may interesting to see how nitrogen works in a Foss tube. I have a Foss tube in my 36er and have not really noticed as much leakage as some report but maybe for some that leak more, nitrogen may help. In auto tires the nitrogen does slightly reduce the amount of leakage but some think it is not worth the added cost or bother.

Last edited by JimT; 2019-05-24 at 09:46 PM.

2019-05-24, 10:29 PM   #14
DrD
Unicyclist

Join Date: Aug 2017
Location: Scotland
Posts: 43
Quote:
 Originally Posted by JimT When considering the rotational inertia or moment of inertia I don't think it is as simple as figuring the change in weight because the air or whatever gas is free to "flow" inside the tire. If the gas was not free to move inside the tire it would be pretty straight forward.
You may well be right on that. The article I linked above (in Cyclist Magazine) does actually mention the gas movement in the tube, however it states that it will quickly get up to the same speed, estimating the time to be a few seconds, so as long as the wheel isn't accelerating too fast it is probably a reasonable first approximation. Also, assuming the gas doesn't flow would (I think) give an upper bound on the pedal force difference.

Folk say they can feel a significant difference when running a FOSS tube versus a butyl tube, so if you compare the tube weight difference (FOSS vs butyl) with the gas weight difference it should give an idea of whether the difference would be felt.

 2019-05-25, 02:39 PM #15 lobbybopster Unicyclist     Join Date: Sep 2008 Location: California Age: 63 Posts: 413 What goes in must come out. I believe that they actually put Nitrogen in high performance tires because the molecules are larger and leak less. The 21% oxygen in normal air are the molecules that search out the small passages and escape. Also they corrode or oxidize the rubber in the tube/tire. I see helium as not having any real benefit. As has been discussed, the weight difference is not that great.

 Tags foss, helium, leak, tube

 Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

 Posting Rules You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules
 Forum Jump User Control Panel Private Messages Subscriptions Who's Online Search Forums Forums Home Latest Unicycling News!     News and Announcements         Submit Unicycling News! Unicycling Discussion     General Unicycling Discussions     Unicycling Videos     Unicycle Product Reviews     Trading Post     Unicycling Articles and Tutorials         New Article/Tutorial Request     Challenge Each Other Non-unicycling Discussion     Just Conversation & Introduce Yourself In Your Language     Deutsches Einradforum     Nederlands Eenwieler Forum     Suomen Yksipyöräiset     Hebrew     Fórum de Monociclismo em Português     Dansk Unicykel Forum     Polskie Forum Monocyklowe     Одноколёсный фо& Administration Forums     Requests, Questions, and Bugs on this site     Test

 Similar Threads Thread Thread Starter Forum Replies Last Post Richardt General Unicycling Discussions 14 2016-09-10 09:14 PM one4all General Unicycling Discussions 16 2013-07-11 05:20 PM Daytripper63 General Unicycling Discussions 13 2013-04-14 02:08 AM mbalmer General Unicycling Discussions 4 2012-04-20 08:48 AM Daytripper63 General Unicycling Discussions 19 2012-03-21 10:39 PM

All times are GMT. The time now is 01:51 PM.

 -- vBulletin 3 ---- Unicyclist.com ------ Unicyclist.com - Pink! ------ Unicyclist.com - No Logo -- Deutsch (DE) -- Dutch (NL) -- English -- Español (ES) -- Français (FR) -- Italian (IT) -- Svenska (SV) Contact Us - Unicyclist Community - Archive - Top