Unicyclist Community

Go Back   Unicyclist Community > Unicycling Discussion > General Unicycling Discussions

Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 2019-01-24, 09:14 PM   #1
jamo
Registered User
 
Join Date: Jan 2019
Location: Texas
Posts: 1
Schwinn giraffe axle help!!

The threads on my Schwinn giraffe were stripped so I started tearing the thing down and guess what happened when I popped the caps off for the bearings?!!!! I am in need of bearings and caps, and most likely the tapered cone on both sides since they are a little eat up. Anyone know where to even look for this ? Do they sell a complete set/kit for a rebuild still?

Newbie on this site and to unicycling for the most part so any help would be appreciated.

Jason
jamo is offline   Reply With Quote
Old 2019-01-25, 04:40 PM   #2
Unicyclist Lou
Unicyclist
 
Unicyclist Lou's Avatar
 
Join Date: Nov 2013
Location: Hoffman Estates, IL
Age: 51
Posts: 262
Check with Tom Miller at The Unicycle Factory. His number is 765.452.2692.
Unicyclist Lou is offline   Reply With Quote
Old 2019-01-25, 09:32 PM   #3
Nasher
Unicyclist
 
Nasher's Avatar
 
Join Date: Apr 2010
Posts: 93
Not sure what the schwim giraffe uses, but I changed my performer giraffe over to a sealed unit - link here:

http://www.unicyclist.com/forums/showthread.php?t=96796

Never had to do anything with it other than pumo up the tyre & ride it since then
Nasher is offline   Reply With Quote
Old 2019-01-25, 10:09 PM   #4
johnfoss
North Shore ridin'
 
johnfoss's Avatar
 
Join Date: Apr 2002
Location: El Dorado Hills, CA
Age: 56
Posts: 16,900
Once you get off the phone with Tom (may take a while), if that didn't work out you could look up that other axle and see if the width is a match. Measure your Schwinn frame and then you can email Unicycle.com with the question if it doesn't appeaar on the product page.

Note that if you make that switch, you will need a new rim and tire (and spokes). The Schwinn uses a 28-spoke wheel vs. what I believe is 36 on the Nimbus. The upside of this is you will be able to find tires. The Schwinn uses and odd size that was very common back in the 70s and 80s, but is now very hard to find. 20 x 1 3/4" is not the same as 20 x 1.75"!

Another reason why using a different hub may be helpful is if you have the older Schwinn hub. These were built like a Track hub, with the sprocket just threaded on, and held by a lock ring. Those could come loose under heavy use, which is a bad thing on a Giraffe. The later version had three hex-head screws holding the sprocket. If you see three hexagonal heads with standard screwdriver slots in them, that's the newer kind, which is better.
__________________
John Foss
www.unicycling.com

"The miracle is this: the more we share, the more we have." -- Leonard Nimoy
johnfoss is offline   Reply With Quote
Old 2019-01-26, 10:59 PM   #5
jaco_flans
Trials & Muni!
 
jaco_flans's Avatar
 
Join Date: Sep 2007
Location: Québec,Canada
Age: 24
Posts: 3,573
Send a message via MSN to jaco_flans
Your local bike shop might be able to help you out. Shimano uses the cone and loose ball system still. They could find something that'll match the Schwinn hub. Worst case they can build a new wheel for it!
__________________
Jakob F.
jaco_flans is offline   Reply With Quote
Reply

Tags
axle, bearings, giraffe, schwinn, stripped


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Q-Axle Loose Crank! Please help. ColinChapman General Unicycling Discussions 17 2017-08-07 03:06 PM
[Wanted North America] Schwinn Giraffe Killian Trading Post 11 2015-09-29 02:24 AM
Need Help Restoring Schwinn Giraffe dcamron71 General Unicycling Discussions 13 2014-02-21 04:48 AM
Schwinn Giraffe + 20" Schwinn Clydesdale Trading Post 0 2012-12-15 11:29 PM
Tightening Axle on Giraffe... maskedriders General Unicycling Discussions 8 2004-08-12 02:13 AM


All times are GMT. The time now is 02:05 PM.


Powered by vBulletin®
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Copyright © 2001-2016 Gilby
Page generated in 0.08086 seconds with 10 queries