View Single Post
Old 2019-12-09, 12:51 PM   #2
bouin-bouin's Avatar
Join Date: May 2008
Location: France in Europe (Le Chesnay - Yvelines)
Age: 54
Posts: 841
Originally Posted by Siddhartha Valmont View Post
Hi everybody,

I tried yesterday to put my 29 wheelset (Nimbus CrMo ISIS 100mm hub) in a QX frame (with magura mounts version).

The bearing holders are spaced 100mm apart but it seems that they are thicker/wider than usual making the spokes heads be in contact with the bearing holders.

Putting aside the defective frame possibility for a second, does anybody can do the following measurements on their Q-axle hub:
  • the flange to flange distance
  • the bearing to flange distance (on each side)

I know it is difficult to measure precisely on an wheelset but even an approximation will do.

Tout can find hub information on spoke calculator and yes QX frames and bearing holders are very thick
CITY XTP 26", MUNI KH26" & KH29", ROAD Oracle 32" and KH36"
my goal : a 3 geared 29" to have only one uni for all kind of rides :-)

Last edited by bouin-bouin; 2019-12-09 at 12:51 PM.
bouin-bouin is offline   Reply With Quote
Page generated in 0.05732 seconds with 9 queries